Loading... Please wait...

Our Newsletter


Sort by:

Autocom Headsets | Extensions

Autocom Universal Noise Cancelling Boom Microphone

  • Length 225mm (not including cable and connector)  
  • Cross section 5.5mm x 4mm
  • Microphone diameter 25mm
  • Microphone thickness 6mm

Autocom Pro Stereo Speakers

  • Speaker carrier Unique ergonomically designed oval
  • 55mm x 45mm x 4 to 9mm thick with integral cable strain relief
  • Cone Lightweight mylar
  • Magnet Samarium cobalt
  • Impedance 32 Ohm
  • Frequency response 25Hz - 22kHz hi-fi quality
  • Sensitivity 106dB
  • Speaker wire lengths Long 520mm, Short 260mm. Fully screened soft, flexible.
  • Connector 7-pin din plug with Autocom rubber boot and integral strain relief.
  • Hygiene foam covers (Consumables)

 

Autocom offers a full range of headset accessories to enhance your Autocom experience. Should you have any questions about your needs, please do not hesitate to contact us.

  • Pages:
  • 1
  • 2
  • $12.99 Autocom Background Noise Sensor Part # 2106
      Autocom Background Noise Sensor Part # 2106 This independent noise sensor (an Autocom exclusive) measures the ambient noise levels at the actual helmet level in real-time allowing the system to adjust the VOX...

  • $22.99 Autocom Coiled Headset 7-pin Extension Lead Part # 2138
      Autocom Coiled Headset 7-pin Extension Lead Part # 2138       Coiled Headset Extension Lead extends the unit lead length by up to 48" (25" compressed/48" expanded) for use when an Autocom is...

  • $4.99 Autocom Foam Speaker Pads 12mm Part# 2160
      Autocom Foam Speaker Pads 12mm Part# 2160     Pair of Foam Speaker Pads/Spacers (thick 1/2" 12mm)  (Ideal for Open Face Helmets with Large cavity areas). Spacers designed to eliminate gaps between...

  • $4.99 Autocom Foam Speaker Pads 6mm Part# 2159
      Autocom Foam Speaker Pads 6mm Part# 2159     Pair of Foam Speaker Pads/Spacers (thin 1/4" 6mm) (Ideal for Open Face Helmets with Large cavity areas). Spacers designed to eliminate gaps between the ears...

  • $29.99 Autocom Front Fit Microphone Part# 2076
      Autocom Front Fit Microphone Partt# 2076     Front-Fit Mic (EFFB), suits full face & some flip front helmets. (previously Part 1111) The 7 Series Front Fit Boom with extension is the ideal...

  • $16.99 Autocom Headset 7-pin Extension Lead Part # 2134
      Autocom Headset 7-pin Extension Lead Part # 2134       Standard 7 pin headset Straight Extension lead (900mm). Straight Headset Extension Lead extends the unit lead length by 900mm (36") for use...

  • $19.99 Autocom Headset LONG Extension Lead Part# 2136
      Autocom Headset LONG Extension Lead Part# 2136     Headset extension lead, 7 pin plug to 7 pin socket (2000mm). Typically used for extending the headset lead under the bikes tank/seat...

  • $41.99 Autocom Headset Loom For Connecting In-Ear Speakers Part# 2091
      Autocom Headset Loom For Connecting In-Ear Speakers Part# 2091     Headset loom with a 3.5mm 3 pole socket on fly-lead for use with typical in-ear monitor type speakers (for use with all 7-pin Autocom...

  • $57.99 Autocom Logic Headset Part# 2116
      Autocom Logic Headset Part# 2116     Complete headset with 8 Ohm speakers. Includes parts 2083 (loom), 2074 (boom) and 2445 (Velcro). Only for use with Logic and Logic Independence systems...

  • $3.49 Autocom Open Face Conversion Kit Windsocks Part# 2156
      Autocom Open Face Conversion Kit Windsocks Part# 2156     Microphone Wind Socks - Open Face Helmet Conversion Kit.  Foam wind sock kit for installation on all Autocom microphones for use with open...


  • Pages:
  • 1
  • 2